5 LEADING CAUSES OF HOUSE FIRES AND STEPS TO AVOID THESE ISSUES
FAULTY ELECTRICAL WIRING OUTDATED
Broken wiring, including faulty electrical outlets and faulty appliances are the most common causes of house and apartment fires in the U.S. Roof fires in luminaires and electrical wiring in the attic are often the culprits. Flickering light bulbs and bulbs that are not switched on can cause burning wires. Burning wires can cause a fire in your home, and they are so dangerous that they often go unnoticed. In some cases, such fires are higher during the month due to the increased use of lights and heaters. Loose electrical connections are the main cause of wire combustion.
POOR INSULATION IN THE ATTIC OVER ELECTRICAL
Fire hazards in the ceiling are not caused by the insulation itself, the way it is installed, or by the way electrical wiring is installed to existing insulation. Investigators have found that roof fires are often caused by material properties of the roof that are not sufficiently insulated, such as ventilation pipes and generators. The heat emanating from these sources deteriorates the roof materials over time and ignites the fire in combination with strong winds. The insulation does not fit near the heat source.
LEAKY ROOF OR IMPROPERLY INSTALLED
Roof leaks should be repaired as a top priority, believe it or not, as water damage is a potential fire hazard. A leaking roof can lead to a failure of electrical wiring in the ceiling or attic. It can also lead to problems with wire shortening. When water seeps through the hinges, junction boxes and insulation can clump together and be exposed to water. The wire is protected by a junction box insulation, but the material is not always safe. Living wires in contact with the water can cause sparks to ignite the material around them.
TYPES OF ROOF: THE GOOD, THE BAD AND THE UGLY
Fire resistant substrates and metal roofs can make your roof fire resistant. Not all roofing materials are the same, and some are more susceptible to fire than others. Roofing materials with this rating are the most resistant to fire. These are roofing materials that have a fire-retardant effect, and if shaken wood is used, it is treated. Metal tiles and sheets can also prevent fires.
THE DANGERS OF A DIRTY CHIMNEYS
Never use untreated wood as it is easy to bind and flammable. Smoke from a chimney creates a layer of a combustible material called creosote that coats the interior lining of your chimney. If you do not clean your chimneys properly for a long time, it can put your roof at risk. To prevent fires, clean the vents and chimneys of your home and install spark protection grilles to prevent embers from escaping and igniting the creosote.
ANNUAL MAINTENANCE PER YEAR WILL REDUCE THE RISK FACTORS
Reduce the risk of fire damage on your roof Your roof is one of the most important aspects of your home. It protects you, your family, your belongings, and the rest of the domestic structure. A fire is one of the worst things that can happen to your home and if your roof is damaged or destroyed it is protected from being exposed and destroyed to the elements. There are some precautions you can take to reduce the risks of this type of roof damage.
Whether you are building a new house or replacing your existing roof, it is important to choose the right materials. There are classes of roofing materials that offer the best fire resistance and unrated materials that are the most resistant. Clay, slate, concrete tiles, fiberglass, and asphalt shingles are all fireproof and an excellent choice to reduce the risk of fire damage.
REPAIR ROOF LEAKS AND ROOF DAMAGE
The warning signs that you need roof repair are blinking, damaged shingles, lack of fire propagation and damaged places where gaps and holes are present. Repair a damaged area of your roof, even if it does not provide the same protection as the rest of the roof, regardless of what type of roof material you choose.
KEEP ROOF CLEAR OF DEBRIS
Keep debris from gathering on your roof. Remove leaves and small branches as quickly as possible after a storm or wind. When roof debris catches fire, it can burn for long periods of time, causing heat to enter the roof material. Clear areas around your home by keeping trees, stacked wood and other combustible waste as far away from the sides of your home as possible. Things that catch fire and flames quickly can make it right through the roof. A clear buffer zone around the house reduces the risk of fires spreading.
MAKE SURE ELECTRICAL SYSTEM IS IN GOOD SHAPE
Problems with electrical wiring can cause fires in the attic and roofs. Make sure you have your wiring checked, especially if you live in an older house and can’t remember you inspected it. If the circuit breaker seems to stumble or the light starts flickering, this could be a sign that something is wrong. If a pipe or luminaire is installed on the roof and does not work, there may be fire damage to the roof.
INSTALL LIGHTNING RODS
There is an unlikely risk that lightning could start a fire on your roof. This can be prevented by installing a lightning conductor. An Arrestor is a device made of brass or copper that provides a safe way for electricity to pass through the floor.
KEEP CHIMNEY CLEAN REGULARLY
Your chimney should be cleaned at least once a year during the winter heating season. Keep your chimney clean, as burning materials and debris can form layers in your chimneys over time. This can ignite and send sparks up to the roof, so make sure your chimney is cleaned regularly.